Mobil Teresstic T 32
Mineral steam and gas turbine oil, with good air release and low foaming tendency
- Industrial turbines
- Circulating systems & bearings
ISO VG 32
Zinc-free turbine oil for gas and steam turbines, with enhanced air release
ViscosityISO VG
Business customers only. We sell wholesale, invoiced to registered companies.
Official approval
Alstom turbine oil (now GE Vernova)
Alstom's specification for the lubricating and control oils of its steam and gas turbines.
Official approval
Siemens TLV 9013 04 — turbine oil
Siemens technical delivery condition for turbine oils for lubrication and hydraulic control systems.
Official approval
Siemens TLV 9013 05 — synthetic turbine oil
Synthetic counterpart of TLV 9013 04, for turbine lubricating and hydraulic control oils.
GE GEK 28143A — turbine oil
General Electric specification for turbine lubricating oil.
| Property | Typical value | Method |
|---|---|---|
| Air release, 50 Cmin | 2 | ASTM D3427 |
| Copper strip corrosion, 3 h, 100 CRating | 1B | ASTM D130 |
| Density @ 15 Cg/cm3 | 0.85 | ASTM D1298 |
| Emulsion, Time to 3 mL Emulsion, 54 Cmin | 10 | ASTM D1401 |
| Flash point, Cleveland Open Cup°C | 228 | ASTM D92 |
| Foam, Sequence I, Tendency/Stabilityml | 0/0 | ASTM D892 |
| Foam, Sequence II, Tendency/Stabilityml | 0/0 | ASTM D892 |
| Foam, Sequence III, Tendency/Stabilityml | 0/0 | ASTM D892 |
| Kinematic viscosity @ 100 Cmm2/s | 5.5 | ASTM D445 |
| Kinematic viscosity @ 40 Cmm2/s | 30 | ASTM D445 |
| Neutralisation numbermgKOH/g | 0.1 | ASTM D974 |
| Pour point°C | -30 | ASTM D97 |
| Rotating Pressure Vessel Oxidation Testmin | 1000 | ASTM D2272 |
| Rust Characteristics, Procedure B | PASS | ASTM D665 |
| Turbine Oil Stability Test, Life to 2.0 mg KOH/gh | 10000 | ASTM D943 |
| Viscosity index | 117 | ASTM D2270 |

Mobil DTE 732 is the ISO VG 32 grade of the Mobil DTE 700 Series, zinc-free turbine lubricants specifically designed for gas and steam turbine applications. Formulated with carefully selected base stocks and additives, including antioxidants, rust and corrosion inhibitors, and anti-foam agents, it delivers outstanding resistance to oxidation and chemical degradation over time. The oil exhibits excellent water separability, resistance to emulsion formation, and anti-foaming characteristics for reliable operation, plus enhanced air release properties critical to turbine hydraulic control mechanisms (air release time 2 min at 50°C). These performance features translate into excellent equipment protection, increased turbine operating reliability, reduced downtime and extended oil-charge life. Typical applications include base-load electric power generation, gas turbine combined-cycle power plants, captive power plants, gas or steam turbine prime movers, and hydroelectric turbine systems. Mobil DTE 732 has the following approvals: GE Power (former Alstom Power) HTGD 90117 and Siemens TLV 9013 04 and 05. It is recommended for applications requiring GE Power GEK 28143A, and meets or exceeds GE Power GEK 120498, 121608, 27070, 32568Q and 46506D, Siemens Industrial Turbo Machinery MAT 812101 and Siemens Westinghouse PD-55125Z3, DIN 51515-1 and DIN 51515-2, ISO 8068 L-TGA and L-TSA, ASTM D4304 Type I and Type III, China GB 11120-2011 L-TGA and L-TSA (Class A and B) and JIS K-2213 Type 2. Typical viscosity: 30 mm²/s at 40°C and 5.5 mm²/s at 100°C, viscosity index 117, flash point 228°C.
Frontier I.G. offers a complete range of solutions across mobility as a whole. Leading lubricants, tyres and innovative technical solutions for automotive, industry and agriculture.