Shell Omala S4 GXV Plus 320

Approved by

• Flender

Standards & approvals

• ISO 12925-1 CKD

  Industrial gear lubricant CKD — ISO 12925

  Class CKD of ISO 12925-1: a gear oil with the same additive package as CKC but greater thermal stability, for gear units running hot.

• ISO 12925-1 CKSMP

  Industrial gear lubricant Type CKSMP — ISO 12925

  Class CKSMP: gear oils containing solid lubricants, for open or slow-running gears under very high loads.

• DIN 51517-3 CLP

  Industrial gear oil CLP — DIN 51517, part 3

  Class CLP, gear oils with extreme-pressure additives; requires an FZG pass plus corrosion and ageing protection.

• DIN 51517-4 C LPX

  Industrial gear oil C LPX — DIN 51517, part 4

  Gear oils on synthetic bases (PAO, ester, polyglycol), with the CLP requirements at higher temperatures.

Specifications

Brand

Shell

Range

Shell Omala

Category

Industrial gear oils

Viscosity

ISO VG 320

Manufacturer code

007A1227

Availability

On request

Typical characteristics

Manufacturer's description

Advanced Synthetic Industrial Gear Oil. Shell Omala S4 GXV Plus is an advanced full synthetic heavy duty industrial gear oil, approved by both SEW and Flender, offering outstanding lubrication performance under severe operating conditions, including reduced friction, enhanced energy efficiency, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals under extreme dynamic conditions.

Applications

• Gear motor systems and other inaccessible installationsShell Omala S4 GXV Plus is particularly recommended for certain systems where extra long life is required, maintenance is infrequent or systems are inaccessible. Additionally Shell Omala S4 GXV Plus is recommended for systems where seal leakages are critical for the operation.
• Enclosed industrial gear systemsShell Omala S4 GXV Plus is recommended for industrial reduction gear systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applicationsShell Omala S4 GXV Plus is suitable for lubrication of bearings and other components in circulating and splash- lubricated systems. For highly loaded worm drives the Shell Omala “W”series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Performance & benefits

• Shell Omala S4 GXV Plus is formulated using an advanced additive system in combination with specially selected synthetic base fluids (mPAO) to provide outstanding resistance to breakdown over long duration and help to reduce deposit formation, sustain film thickness even at higher operating temperatures. Shell Omala S4 GXV Plus can operate successfully at bulk temperatures up to 120 0 C
• Shell Omala S4 GXV Plus offers the potential to significantly extend service intervals due to its excellent thermal and oxidative stability compared to other synthetic oils and esp. mineral industrial gear oils.
• Shell Omala S4 GXV Plus is formulated to have high load carrying capacity to resist against scuffing wear and high mircopitting resistance providing long component life even under shock loading conditions. These features provide benefits over mineral oil-based products in terms of gear and bearing component life. Shell Omala S4 GXV Plus also has excellent rust and corrosion protection, even in the presence of contamination by water and solids. Shell Omala S4 GXV Plus has passed the severe bearing tests and showed no occurrence of WEC damages. So Shell Omala S4 GXV Plus does not promote WEC bearing failures acc. to the FVA 707 workgroup test protocol.
• Shell Omala S4 GXV Plus can help maintain or enhance the efficiency of industrial gear systems through improved low temperature performance and lower friction in comparison to mineral oil-based products. This provides better lubrication at low start-up temperatures.
• Shell Omala S4 GXV Plus can operate in high flow rate systems with filtration as low as 3 micron mesh size per validation with extended OEM filterability tests.
• Excellent compatibility with seals, paints and sealantsShell Omala S4 GXV Plus is recommended for industrial reduction gear systems using a wide range of seals, including nitrile rubber and fluoro-elastomers. Shell Omala S4 GXV Plus meets the demanding requirements of both Flender and SEW for their gearboxes and gear motors.
• Long oil life - maintenance saving Shell Omala S4 GXV Plus is formulated using an advanced additive system in combination with specially selected synthetic base fluids (mPAO) to provide outstanding resistance to breakdown over long duration and help to reduce deposit formation, sustain film thickness even at higher operating temperatures
• Excellent wear and corrosion protection Shell Omala S4 GXV Plus is formulated to have high load carrying capacity to resist against scuffing wear and high mircopitting resistance providing long component life even under shock loading conditions. These features provide benefits over mineral oil-based products in terms of gear and bearing component life
• Designed to meet or exceed the OEM requirements of
• Liebherr Mining – Omala S4 GXV Plus ISO 220 – 680
• China National Standard GB 5903-2011 CKD Omala S4 GXV Plus has been approved by
• Flender – approved according to Flender T 7300 Omala S4 GXV Plus ISO 150 – 680 are approved by Flender for use in Flender gear units
• SEW – approved according to SEW approval process Rev. 070040513, Omala S4 GXV Plus ISO 150 – 680 are approved by SEW for use in standard gear and industrial gear units

Fits

• Industrial plant & equipment