Shell Tonna S2 M 220

Standards & approvals

• DIN 51502 CGLP

  Lubricant designation CGLP — DIN 51502

  The DIN code for machine tool slideway oils, with antiwear additives and friction modifiers against stick-slip.

• Fives Cincinnati P-50

  Fives Cincinnati P-50 — ISO VG 220 slideway oil

  Fives Cincinnati approval for machine tool fluids; slideway oils that prevent stick-slip and washing off by coolant.

• ISO 19378 GA

  Slideway oil, class GA — ISO 19378

  Class GA of the ISO slideway (way) lubricant classification: an oil for horizontal machine-tool slideways, with friction modifiers against stick-slip.

• ISO 19378 GB

  Slideway oil, class GB — ISO 19378

  Class GB of the ISO slideway lubricant classification: a tackier oil for vertical slideways, so it does not drain off the surface.

Specifications

Brand

Shell

Range

Shell Tonna

Category

Circulating & slideway oils

Viscosity

ISO VG 220

Manufacturer code

001D7772

Availability

On request

Typical characteristics

Manufacturer's description

Oils for machine-tool slideways. Shell Tonna S2 M is specially designed for lubricating machine-tool slideways and ways, tables and feed mechanisms. Improved adhesion and stick-slip characteristics combine to deliver superior frictional performance for slideways. They are particularly recommended where there is high exposure to soluble cutting fluids.

Applications

• Machine-tool slideways, tables and feed mechanisms
• Developed for use on a wide range of machine-tool slideway surface materials, including cast iron and synthetic materials. Shell Tonna S2 M can also be used in hydraulic and transmission systems, in applications where Shell Tonna S3 M oils are generally preferred. The lower viscosity grades are intended for lubricating horizontal slideways (Shell Tonna S2 M 32 or 68). For vertical slideways, use Shell Tonna S2 M 220.

Performance & benefits

• Rapid separation from water-miscible cutting fluidsComplete and immediate separation from water-miscible fluids allows easy removal by skimming. This helps achieve an extended service life for coolants, better cutting performance and reduced health and safety concerns.
• Good adhesion to machine-tool slidewaysEnsures very good adhesion to slideway surfaces, resisting wash-off by metalworking fluids and thereby reducing oil consumption and maintaining uniform working conditions for machine tools.
• Good frictional propertiesThe problems caused by "stick-slip" are overcome, allowing more accurate positioning. This delivers benefits in improved surface finish quality and dimensional accuracy of workpieces.
• Good anti-wear performanceProvides good wear protection for slideways, gears, bearings and hydraulic system components.
• Excellent corrosion prevention characteristicsProvides effective corrosion protection for both components and machine-tool surfaces in the presence of water-miscible metalworking fluids.
• ISO 19378 / ISO 6743-13 GA and GB, DIN CGLP
• Fives Cincinnati P-50 (ISO 220), P-47 (ISO 68), P-53 (ISO 32)

Fits

• Machine tools