Petronas Grease Li EP 0

Standards & approvals

• DIN 51502 KP0K-30

  Lubricant designation KP0K-30 — DIN 51502

  DIN 51502 grease code: K = rolling and plain bearings, P = EP additives, 0 = NLGI grade, K = maximum temperature, -30 = minimum temperature.

• ISO 12924 XCCHB0

  Grease classification XCCHB0 — ISO 12924

  ISO 12924 grease code: X = grease, the following letters = lowest and highest service temperature, water resistance and EP performance, the final figure = NLGI grade.

Specifications

Brand

Petronas

Range

Petronas Grease

Category

Industrial greases

Viscosity

NLGI 0

Manufacturer code

80251

Availability

On request

Typical characteristics

Manufacturer's description

PETRONAS Grease Li EP 0 is an extreme-pressure lithium grease recommended for multipurpose applications, including lubrication of both plain and anti-friction bearings even where severe or shock loads are experienced. It is also suited to pins and bushes, geared couplings at normal speeds, and vibrating shafts and sliding mechanisms under normal operating conditions, with a recommended operating temperature range of -30°C to +130°C. The softer NLGI 0 consistency makes it easy to pump and well suited to centralised lubrication systems and lower-temperature applications. It provides good extreme-pressure protection, with a Four Ball EP weld point of 250 kgf and Four Ball Wear of 0.50 mm, a dropping point of 190°C, and good rust protection. Grease Li EP 0 meets DIN 51502 KP0K-30 and ISO 12924 XCCHB0, with a worked penetration of 370 mm/10 and a base oil viscosity of 190 cSt at 40°C.

Applications

• PETRONAS Grease Li EP 0 is an extreme-pressure lithium grease specially developed for multipurpose applications, including the lubrication of both plain and anti-friction bearings where severe or shock loads occur.
• Formulated with selected mineral base oils enhanced with lithium 12-hydroxystearate soap and advanced extreme-pressure, antioxidant, anti-rust and corrosion-inhibitor additives.
• It provides high load-carrying capability, low-temperature dispensing and resistance to water wash-out.
• Recommended for multipurpose applications, plain and anti-friction bearings under severe or shock loads.
• Also for pins and bushes, geared couplings at normal speeds, and vibrating shafts and sliding mechanisms under normal operating conditions.
• Recommended for an operating temperature range of -30°C to +130°C.

Performance & benefits

• Very good pumpability, with strong performance where low-temperature performance is required.
• High load-carrying capacity, thanks to special EP additives that let the grease withstand heavy shock loads without losing the lubricant film.
• High rust and corrosion protection, protecting bearing surfaces against corrosion even when the grease is contaminated with water.
• High resistance to water wash-out, protecting equipment and maintaining lubrication even in the presence of water.
• Mechanical stability, with little or no change in consistency when worked in the lubrication of wheel bearings.