Petronas Grease CaSX 2/290

Standards & approvals

• DIN 51502 KP2N-30

  Lubricant designation KP2N-30 — DIN 51502

  DIN 51502 grease code: K = rolling and plain bearings, P = EP additives, 2 = NLGI grade, N = maximum temperature, -30 = minimum temperature.

• ISO 12924 L-XC(F)DIB 2

  Grease classification L-XC(F)DIB 2 — ISO 12924

  ISO 12924 grease code: X = grease, the following letters = lowest and highest service temperature, water resistance and EP performance, the final figure = NLGI grade.

Specifications

Brand

Petronas

Range

Petronas Grease

Category

Industrial greases

Viscosity

NLGI 2

Manufacturer code

77902

Availability

On request

Typical characteristics

Manufacturer's description

PETRONAS Grease CaSX 2/290 is a calcium sulphonate complex grease recommended for industrial, marine and off-road applications, and for most heavy-duty bearing applications, including large plain and anti-friction bearings and other mechanisms requiring a high-temperature NLGI 2 grease, such as slides and cams. It is a multi-purpose grease that excels in marine applications, with a recommended operating temperature range of -30°C to +140°C (max +180°C). The grease combines excellent mechanical stability, low oil separation and a high dropping point above 309°C with strong water washout resistance, water spray-off resistance and rust protection, including a pass on the salt-water Emcor test. It also delivers good extreme-pressure protection, evidenced by a Four Ball EP weld point of 620 kgf, and passes the SKF R2F test at 140°C. Grease CaSX 2/290 meets DIN 51502 KP2N-30 and ISO 12924 L-XC(F)DIB2, with a worked penetration of 280 mm/10 and a base oil viscosity of 290 cSt at 40°C.

Applications

• PETRONAS Grease CaSX is a calcium-sulphonate-complex grease specially developed for industrial, marine and off-road applications.
• Formulated with mineral base oils enhanced with calcium-sulphonate-complex soap, anti-wear, antioxidant, anti-rust and corrosion-inhibitor additives.
• It provides excellent load-carrying capacity, making it suitable for heavily loaded applications, plus excellent mechanical stability, corrosion protection and water resistance for wet and corrosive environments.
• Recommended for most heavy-duty bearing applications, including large plain and anti-friction bearings and other mechanisms requiring a high-temperature NLGI 2 grease, such as slides and cams.
• Also recommended for applications requiring a multipurpose grease, excelling in marine use.
• Recommended for an operating temperature range of -30°C to +140°C (max. +180°C).

Performance & benefits

• Excellent load-carrying capacity, thanks to special EP additives that let the grease withstand heavy loads without losing the lubricant film.
• Excellent rust and corrosion protection, protecting bearing surfaces against rust and corrosion even when the grease is contaminated with water.
• Excellent thermal and oxidation stability, withstanding high operating temperatures without hardening or forming bearing deposits.
• High pumpability, delivering high performance where low-temperature performance is required.
• High resistance to water wash-out, protecting equipment as the grease is not easily removed in the presence of water.
• High adhesive and cohesive properties, giving high grease tenacity that helps reduce leakage and extend re-lubrication intervals, reducing maintenance costs.
• Mechanical stability, with little or no change in consistency when worked in the lubrication of bearings.